How To Get It Done: Command Prompt Configuration Guide

It was long past that the only real means was supposed to work from the control line. Microsoft did its best to eradicate the demand for power users and administrators to make use of the command line within a regular basis.

Even though the control line isn’t seen by us it never went off –it’s simply hiding behind the powerful Windows GUI. With the GUI could be your best way to proceed. There are times once the command line can be the sole alternative for restarting activities, such as tracert and ping diagnostics. This drill-down will reveal to you everything you could do in order to better the control prompt encounter.

A narrative of distinct construct amounts
The following guide is written for XP, 2000, or Windows NT. Some will not hold true.

COMMAND.COM vs. Cmd.exe

2000, windows NT, and XP and Windows 9x for the reason that you will find two approaches to access to the control line change. By the Run dialog box, then you can type either control or even cmd. The gaps are critical to the way you make utilize of the control line, although both receptive exactly that which seem to be windows. COMMAND.COM is your ms dos control interpreter that is with us forever.

These versions of Windows have another interpreter that provides factors and functionality in comparison to the brethren. If you would like to conduct an old, MS-DOS-based program, then I suggest utilizing the COMMAND.COM interpreter throughout the cmd ultimate guide. If you would like to carry out some power setup methods from the control line, then you have to make utilize of this Cmd.exe shell.

To get into the Cmd.exe shell possessions page, only right-click its own shortcut and then choose Properties from the context menu, as shown at Find A. Programs

There are before beginning making modifications to the command prompt. When coming up with changes the changes will likely probably be implemented to each of control drives one start with this shortcut. If you create changes from the Command prompt Properties window, then you will have the possibility to place the changes for windows for your current window. Furthermore, in case you choose the option that is default option by right-clicking the title bar of this control prompt, then the changes will be implemented to each of control drives one start with this specific shortcut.


The Compatibility tab can be found from Windows XP, however, it has no options because the system sets compatibility manner varies.

The Standard tab

This tab enables you to modify the name of this shortcut as well as perform general actions to your shortcut. Additionally, it is possible to change the features of this shortcut document, like rendering it compressed or encrypted, by simply manually pressing on the Advanced button.

The Shortcut tab

The Shortcut tab comprises basic setup items to that Cmd.exe shortcut (and therefore the performance of Cmd.exe). These things haven’t some direct influence on the true behavior or functioning of this control shell window, however, they cope with the way the shortcut works and looks:

Goal: This product is generally not changed. It offers the mark location (i.e., the executable application ) for your own shortcut.

Begin in: This field lets you configure the start directory of this control shell. Then you also can create sure they are easier to work with altering this field, For those who own an assortment of utilities located in a folder in.

Shortcut key: You now also are able to configure an integral combination to function like a shortcut key to the control shell. Input the main element in the area you would like to make utilize of and use the combo CTRL+ALT+your_key.

Run: This field lets you configure which kind of window that the control shell opens to. By default, that can be set in Regular Window, when you would like, however you may configure it to get Maximized or Minimized.

Opinion: Your comment field gives you input a value for the Tool Hint which may display once you put the mouse cursor within the shortcut. Find B demonstrates just how to decide on a new icon to your shortcut.

Advanced level buttonIn Windows XPyou are able to configure alternative credentials using the Run As command.

The Security tab

The Security tab enables you to place the NTFS permissions for your own shortcut. You’ll do it via exactly precisely the process you’d use for just about almost any document, but I am not certain why you’d wish to put permissions in the shortcut rather than the executable file. But should you should do this, then here is the area.

You are able to configure behaviour and the look of this control shell or from. Layout, Font, the Options, and Color tabs are all offered for settings.

The Options tab

The Options tab (Figure C) comprises several options that let you configure the simple look and functionality of this command prompt.

You’ll discover:

Cursor Size: You’ve got three options here in order to restrain the magnitude of this command line cursor: Small is one blinking underline, Moderate is really actually just a half-height canning square, and Big is a full size canning rectangle.

Display Options: You now have the choice of Window or Fullscreen. I suggest steering clear of the complete Display setting in the event you require access. From that point it’s possible to right-click the control prompt in the taskbar, select Properties, and then switch back again to Window perspective.

Control Background: The Control History department offers configuration options to using this DOSKEY functionality of this control prompt. With the Up Arrow and Down Arrow keys, It is possible to cycle.

Quantity Of Buffers: This value determines the number of concurrent instances of this control prompt you are using different DOSKEY buffers for. With the default value of 4, then you may consume around four control and each may have a unique buffer.

QuickEdit Mode: Choosing this option will let you make use of the mouse to highlight text to replicating, as exhibited at Figure Steel. When you have highlighted press [Enter] to dedicate it card.

Insert Mode: Choosing this option lets you insert text at the tip of the cursor from right-clicking your mouse.

Auto-complete: This choice is available from the Windows XP Defaults window from right-clicking the control prompt name bar and selecting Defaults. It enables one to complete controls that are typed by pressing [Tab] to cycle.

The Font tab

In the event you’ve selected the Raster Fonts (default option ), then you will be in a position to choose a font size from its own X from Y measurement. If you would like, you could configure the Lucida font. You’re able to see the effects in the Windows Preview and Selected Font areas.

The Layout tab

The Layout tab displayed at Figure F contains three quite simple items which it is possible to configure to modify the magnitude of this control prompt and traces of text inside.

Items Within the Layout tab will be as follows:

Even the Height value configures the amount card. Whether this Height value is higher compared to the Height significance to your Window Size controller scroll bars will be displayed as demanded. Even the Height value configures the number of traces the command prompt window will likely soon probably be.
Window Position: You also are able to configure the Command prompt window space from the top and left borders of the display in case the Let System Position Window checkbox isn’t checked. Then you will not have the ability to configure the Windows Status preferences When it’s checked.

Along with tab

The best solution to find your own”ideal” preferences is always to play the available options by altering the colors as needed before you are happy.

The four things that colors can be configured by you for are as follows:

Display TextThis is actually the tone of the text displayed in the key Command prompt window.
Display Background: Here is the background color of this Command prompt window.
Popup TextThis is actually the tone of the text displayed within a pop-up window.
Popup Background: Here is the background color of a pop-up window.

Last ideas

This list outlines only a couple of odds and ends you ought to know about whenever using the control prompt:

you should be multiple control prompt shortcuts. Allowing you to customize greater than 1 shortcut and then set up each to get a particular endeavor.
Pressing [F 7 ] opens the pop-up menu, from that you may pick the controls from the buffer.
Pressing [F9] lets you pick a control by number. The amounts are just like noticed from the [F 7 ] pop up.

That is nearly everything. Now, proceed and control style!

Leave a Reply